Logo
Please visit our Sponsors

FAQs about Aquarium Chillers: Resun

Related Articles: Marine Tank Heating, Cool/Coldwater Marine Systems Coldwater Sharks,

Related FAQs: Chilling 1, Chillers 2, & Lighting Waste Heat Production/Elimination, FAQs on: Fans For Cooling, Chiller Rationale/Use, Selection, DIY, Installation, Maintenance, Troubleshooting, By Type/Characteristics: Drop-in, Flow-Through, Therma-Electric, By Make/Model/Manufacturer: DIY, Arctica, AquaMedic, Aquanetics (out of biz.), AquaLogic, AZoo, Current/Prime, Custom Sea Life (out of biz), Delta, Iceprobe, JBL, Pacific Coast, Sfiligoi, Teclima, Teco, Tradewind, Via Aqua, West Coast, Other Makers/Models,  & Cool./Cold Marine Set-Up, Heating, Water TemperatureMetal Halide Heat Issues,

www.resun-china.com/

Chiller performance   8/24/06 Hello! Hope you can offer me some technical help here. As I explained in the previous e-mail, my chiller broke down a couple of weeks ago and I lost almost everything in my tank. Now I had it fixed (the compressor was replaced and the heat exchanger lines flushed out of any debris) and is working again but after some research I read many warnings about short cycling of the compressor if the unit too big for the aquarium volume. The chiller I have is a Resun CL-650, a 1/4 hp unit and my tank a 55gal + 10 gal refugium, will this be what killed my chiller? <Mmm, doubtful> I don't recall the frequency of the on-off cycles previously (it have been working for more than a year) but now I am and the compressor kicks in for more or less 15 minutes to pull down 2deg from 84deg to 82deg set point and then shut off for about 20 minutes and the cycle repeats (this with an air temp of +/- 91deg in my living room) would this cycle be considered short cycling? <Is rather short, but shouldn't be a problem here. Bob Fenner>



Become a Sponsor Features:
Daily FAQs FW Daily FAQs SW Pix of the Day FW Pix of the Day New On WWM
Helpful Links Hobbyist Forum Calendars Admin Index Cover Images
Featured Sponsors: