Logo
Please visit our Sponsors
FAQs about Commercial & Custom Tanks for Marine Systems: Design/Engineering  

Related Articles: Size Doesn't Always Matter! Thoughts on the Desire to Create Bigger Marine Aquariums By Scott Fellman, Making Your Own Tanks, Sumps, Designer Marine tanks, stands and covers, Aquarium RepairMarine System ComponentsCanopies, Covers & Lighting Fixtures,

Related FAQs: Tanks, Stands, Covers, Custom Aquariums, Stands, Covers..., FAQs on Commercial, Custom Tank: Shape, Materials: Acrylic, Glass, Other... Tools, Location, By Make/Brand/Manufacturer Name, DIY Tanks, Sumps 1, DIY Tanks/Sumps 2, DIY Tanks/Sumps 3DIY Tanks/Sumps 4, & DIY Tanks, Sumps 1, DIY Tanks/Sumps 2, DIY Tanks/Sumps 3DIY Tanks/Sumps 4, & FAQs on DIY Tank & Sump : Design, Shape/Size, Materials, Tools/Construction/Sealants, Plumbing... DIY Acrylic Tanks, DIY Glass Tanks, DIY Wood Tanks, DIY Other Material Tanks...

450 gallon glass aquarium with (just) euro brace ?       1/30/19
Hi Bob ,
<Raj>
This is Rajindra from Trinidad & Tobago,
<Ahh! Have visited both. In fact, the International Hash House Harriers is returning to Trinidad next year; and I hope to be there>
I'm building a 450 gallon aquarium with 3/4" thick glass ,96" long x 36" wide x 30" tall, I want to do euro brace without any center brace, do you know what width and thickness of brace can hold this tank together .
Thank You .
<Mmm; well; I myself would add two equally spaced braces here... across, on top of your Euro-bracing... of at least a half foot width. The last time I was on Tobago, the ground REALLY shook during an earthquake. The place we were staying at had all the mortar in their brick barbecue come apart! I'd go with the bracing I mention Raj. Bob Fenner>

Tank question; use as an aquarium      9/16/15
I bought I 120 gallon aquarium used online it's a custom job I suspect due to the strange trim that looks like a show piece. It was being used as a water dragon enclosure, but was purchased as an aquarium I was told.
It's built with half inch glass like it should be. However what bothers me is it was built with a 2 pane bottom with a seam in the middle.
<Not likely a problem>
Now the bottom trim was designed for this and has a center brace, and sits at the same level as the side rails. Is this a tank I can trust.
<Likely so; I'd fill it outdoors for a trial run though>
Should I lay a 3/8 panel inside to cover entire bottom, or just a few inches either side of the seam. Should I never use as an aquarium.
<As above; I'd use it as is>
The other weird thing is the top corners, on the back panel are cut at 45 degree angles. The fancy trim covers the corners and is sealed to the glass well as well as silicone can seal to plastic anyway. Should the water level be kept below this point.
<Yes; just>
I know probably a dumb question. And if so does that mean my options are limited in regards to a sump. Only functional in a closed loop, or hob filter system.
<Sump.... as in drilling or using a hang on siphon box? These should still be options here>
Thank you for your time
<Welcome! Bob Fenner>

Saltwater Fish Only holding systems; dis. control, set up.... MUCH to consider       8/14/15
Hi there,
<John>
We own an aquarium store and we have 2 main 2000g fish only systems.
Both are running the following:
Fluidized Kaldness media
Protein Skimmer
Air driven sponge filters to keep tanks clean
<Mmm; what re discounting spread of pathogenic disease? I'd at minimum have a serious UV for each (sub) system; possibly a set of cartridges (though a pain to switch out, keep clean)>

Each tank is plumbed into a central sump and each system is divided into 84 individual tanks.
What my question is that we have been experience some deaths and mainly due to disease we believe and we are trying to keep it to a minimum.
<Ahh!>
Here are my questions:
1) Should we always run medication in our systems such as Cupramine at ~ 0.25 - 0.4 and Praziquantel
<There are many stores, wholesale livestock suppliers and collector/distributors who continuously run copper... and this is a good brand. The Prazi.... I'd rather administer an Anthelminthic via foods/feeding... do you have a SOP for dipping incoming fishes? Have you read mine? It's posted on WWM>
2) Put regular aquarium gravel to cover bottom of tank that collects a lot of detritus
<Yes; worthwhile to use substrates with Labrids, Gobioids, Blennioids, other fishes... smaller grades (crushed coral or Aragonite); but/though calcareous materials will hasten loss of copper (this will have to be tested and added to at least once daily)>
3) What can we do about algae constantly growing on our tanks from lights on 8 hours a day
<The copper will do this>
4) Is a UV sterilizer crucial and if so, what wattage or model would you recommend for a 2000g system?
5) If we find ich in our holding system, should we treat the entire system since they all share the same water?
<All? You state above there are two systems... the configuration and amount of UV depend on your flow rate. This is also gone over on WWM. Where, when in doubt, over-size>
6) Any other equipment list you would recommend?
<Oh yes; an ozonizer... DO read on WWM Re and please write me back with specific questions>
Thanks!
John
Re: Saltwater Fish Only holding systems        8/15/15

Thanks for the fast reply!
<Welcome>
I have been reading through your website and I will definitely try the guerrilla method. We have 30 boxes coming from Philippines in 2 weeks.
<Ahh; DO please read over and over... (am so olde that I'd make "index cards" of the steps involved.); make sure you have adequate supplies on hand; including staff that know the procedure to help you>
Just one question though. Is it possible that instead of a drip method to just scoop a cup of water into the foam boxes every 10 minutes instead of running 30 drip lines?
<It is; yes>
And for aeration, do you suggest using a manifold or how would you aerate every box without running 30 airlines?
<Aeration is nice; but if you have enough help... water movement (to dilute waste, ultimately bring pH back up) will do. IF you have air, a manifold, DO use it>
Thanks!
<Certainly welcome. BobF>
Re: Saltwater Fish Only holding systems        8/15/15

Gotcha! Oh and one more thing.
Do you recommend Prime or Nova+ and Amquel? And should I always dose it when receiving new shipments?
<All three are fine products; and include some of the same ingredients.
None will continuously absorb/neutralize ammonia however. B>
Thanks!

Re: commercial holding tank questions     5/18/13
Hi Bob...Thanks for the quick reply as usual.  When you say replace with coral sand what type do you mean?
<Please read here:
http://www.wetwebmedia.com/marine/setup/marsetupindex1.htm
Scroll down to "Marine Substrates">
  I should clarify from my first email that I currently have the CaribSea Special Grade aragonite sand which is more like small coral chips than sugar sized sand.  Is that what you were referencing?
<Am a fan of the maker and this product, but it's not what I'd use... you'll read re why>
  I was thinking I needed to remove all the calcium based substrates and
rock in the system if I wanted to run copper? 
<Mmm, no... will have to replace more frequently, but has to be done w/ or w/o>
My ORP is currently at 250
<Too low... See WWM re>
but no ozone or UV sterilization is currently on as the CP is still running through the holding system.
<It "only lasts a day" or so... is not good for continuous treatment>
 The 150g sized sump was as big as space allowed unfortunately.  I think I am leaning more towards setting up another holding system in a separate back room to hold new arrival shipments. 
<Ahh, worthwhile... IF you can build a customer base that will justify the expense... takes time... a few years in most markets>
I usually only do 2-3 boxes of fish at a time anyways so I'm looking at a maximum of 50 or so fish an order.  I have never had much success using copper
<What brand/make?>
 which is why I was so interested in in using the CP as it seems much gentler on the fish and if I understand correctly treats the big three diseases (crypt, velvet, brook).   I was thinking maybe a 4ft  three level pallet rack with 3 x 75 gallon tanks divided into cubicles.  Each level could be it's own separate system if I do some type of closed loop from left to right with a small circulation pump to push the water from left to right and the slotted dividers to hold the fish in sections.  Crypt prone fish (tangs, angels, puffers) could go in one 75g system.   Disease resistant fish(wrasses, gobies, damsels) in a separate 75g system.  Or would it be better to just do one larger system with a small sump and treat all fish as one.
<A tough question... for expedience sake, I'd likely run as one... w/ a separate system for non-fishes of course>
  How many gallons do you recommend for a good QT system for my size orders(40-50 fish)?
<What you state is about right>
 How long to hold new fish in the QT?
<A week or two... depending on the frequency of incoming shipments, how much holding capacity you have>
 I was thinking one to two weeks if no symptoms occur?   I would like to do this store the "right" way and I am willing to invest the capital to keep the livestock healthy and well conditioned.  One final question...for my 1000g saltwater system what would your recommendation be for my UV and Ozone?
<... the latter... >
  Is 1g/h enough for 1000g?
<Should be... do you have a dryer? You may need one>
 300watts for the UV?
<Depends on the quality. Am a huge fan of TMC/Vectron and Emperor Aquatics here>
  Like I said I was thinking of upgrading my Ozone and UV anyways so I would like your thoughts on size recommendations if possible.  Thanks again for all your help.
<Glad to help. Cheers, Bob Fenner>

120 gallon SW FOWLR with possibly wasted space.    9/29/11
Hello, my apologies for a possibly stupid question, and maybe too much background.
<No biggee>
I recently moved into marine fish-keeping. I have a 120 gallon tank, with a 50 gallon sump, 100 lbs of sand (sugar grain sized, to a depth of just under 2")
<Would add another two>
and 150 lbs of live rock, with an additional 5 lbs of rubble in the sump and a DSB. I have a Berlin sock on the inflow to the sump and a skimmer as well. So far so good. The trouble is, this tank has a display volume of 120 gallons, but has a built in overflow box/refugium in the back, with a volume of around 30 gallons. The tank has finished cycling, but has no livestock as yet. I'm in no rush, and I'm waiting for the tank to mature a little more. I read 0ppm ammonia, 0 ppm nitrites and around 30 ppm nitrates.
Salinity is 1.025 and ph is 8.5.
<Ok>
My question involves the overflow built into the tank. The built in overflow is nice, in that the more volume the better in my humble opinion. However I have no idea what to do with it. I have a hood that fully covers the top, with 8X T-5 tubes in it. This prevents me from directly lighting this area without a drastic redesign of the hood. It is baffled (as indicated in the attached picture).
<Mmm, you could re-locate the fixture/s in a canopy of your design, creation>
I feel that something productive could be done with this volume, but I am at a loss as to what. If nothing suggests itself I will leave it be and be glad of that extra buffering.
I resized the pictures to save you some bandwidth, but they aren't very large at this point. I'll send larger if requested.
<Are fine, thanks>
Thank you for your time and help,
Ian Springer
<Well... as you state, the shape and position of these spaces is not of much use, flexibility... I'd likely ignore for now. Bob Fenner>
P.S. If you see Bob Fenner, tell him Hi! I'm a San Diego resident myself; I saw him a few years back in La Jolla, wish I could have gotten my copy of his book signed.
<<Me too>>

Re: 120 gallon SW FOWLR with possibly wasted space.    9/29/11
Thanks for the quick response! I was afraid there was nothing clever to do with that space, thanks for your time though. I'll rinse and add more sand this weekend, per your suggestion. Just plain old aragonite however, not the live sand as my wife is already pretty unhappy with my fish keeping expenditures.
<Ok>
I am a bit surprised at how high my pH is, considering I'm using filtered seawater from Scripps.
<Am VERY familiar... have been inside the sand filters at the base, S. of the pier>
I'll keep an eye on it, and double check my re-agent.
It may be bad.
<Likely so. BobF>
Thanks again,
Ian

Re: 120 gallon SW FOWLR with possibly wasted space.    9/30/11
Oh, p.s. Next time you are on the left coast, the first pitcher(s) of beer are on me! Thanks again
<Ooh, you're on! B>

Reef Ready Tanks vs. Standard Tanks 11/12/10
Can you please tell me the Pros & Cons of getting a Reef Ready Tank vs. a Standard Tank?
<"Reef Ready" tanks will have an overflow built into them for use with a sump. They are typically inadequate. See: http://wetwebmedia.com/SystemPIX/PlumbingPix/Oneinchart.htm. Most reef ready setups use these 1" overflows and claim way more flow than can actually be had. I am a huge proponent as the owner of a company that sells overflows that actually flow, Glass-Holes.com, of buying a standard
tank and then picking your overflow to suit your needs. Scott V.>
Mary

Large Reef Tank Design Questions Gentlemen - I have written to you in the past with questions concerning things in one of my tanks ( I have 4 - 1 large predator, Two Reefs, and a micro reef). I write today on a different topic and hope either you can help me or point me towards those who can assist me. Feel free to forward this to anyone you deem appropriate I'm a high tech guy or had been for the last 15 years (until this years layoffs - No I opted out instead of fighting it out with the rats on a sinking ship, you know eventually they will turn cannibalistic). Any who to make a long story short, there are 9 of us good friends and coworkers who all sold their souls for stock options and cash for a minimum of 10 years each. After opting out of this each of us was tired of the rat race of that lifestyle ( constant travel to exotic foreign cesspools - Aah vacation is so much different than work isn't it). All of us spent this time transferring the industry from the US to everywhere else it was cheaper to do it (quite a few strange places I will admit - Japan, Korea, Malaysia, France etc) so it is truly a sinking ship here domestically - We decided to form a group to build a business just for fun but that we could experience our old sense of self worth - So we created the Los Vatos corporation to build something similar to a Dave and Busters but less glitzy and more affordable to the average man (because even though each of us made 6 figures we all complained that a $250 night out with the wife and kids to have a good time is just plain outrageous). I digress though so on with it - We created this corporation and are in the process of designing our first family entertainment center with the concept of letting everybody have fun at a fraction of these other places, while introducing our hobbies / interests to the world at large (cold beer, nice cars, video games, billiards, good food, water, fish). All but 2 of us a coastal creatures who grew up on or very near the water 4 from the Texas gulf coast and one each from Northern and Southern California. The poor guy from Phoenix doesn't know what he missed). Where do you guys come into it ??? Well my partners know of my fascination with Saltwater (another partner is a freshwater guy with multiple biotope aquaria his best is a local Texas one) as such they gave me a space 40 feet long by 15 feet deep in our restaurant waiting area / entry bar to create an aquarium of large scale - Here is where you guys come in - I have this big space and a general idea of things, however I would like to do a more natural setup sliding away from technology as much as I dare to ensure my charges well being - I am collecting information on the "Ecosystem Approach" as my micro reef works this way - It had been running as such for about a year before I ever heard of it and it is generally agreed between my friends it is the best looking of all my tanks. Size constraints do not allow me to convert the other 3 tanks to this method to test it on a grander scale. All these run just as is Bob's book. In short while not on par with you or your cohorts I may actually know a couple of things, but I am smart enough to know what I don't. I've read about Richard Harker's 2000 gallon aquarium and envision it's construction along similar lines, but I wanted to pick you guys brains with the question -- <our pleasure to help> If somebody walked up to you and said here is this space 40' X 15' X 12' - I want to build and aquarium for myself - What would you do? <many possibilities here. I take great pleasure too in system planning and conceptual designs. I covered some such dynamics in the first chapter of my Book of Coral Propagation... even more dramatic designs in the second volume (early 2003). I have also consulted a few large public aquaria on top of many private systems as well. It would be my pleasure to dream with you. Without haphazardly spewing stream of conscious fantasy designs... let's do this up right. Let me trouble you to send me a simple photograph of the allotted space (or draw a diagram if you like). I'm looking to get an idea of the surrounding environment and its likely integrity/functionality with the system and its application... looking for access to drains, water supply, electricity, etc.> I eagerly await your input or direction and fully respect that this is not a question so easily answered <agreed... not in a simple e-mail. Lets see a basic floor plan or photo of layout and that will open the floodgates for the imagination. Fair warning... expect dramatic from me :p > and I also want to add I want to do this myself not to save cash in a commercial venture but more along the lines of I dream of it. <understood and admired, my friend. I believe this to be true for what so much floor space could otherwise be used for commercially. I'm looking forward to chatting more. I also noticed that you are in Texas... I'll be in Dallas 9/26-9/30 at MACNA (www.dfwmas.com). Perhaps we can chat even more there if you'll be making the trip to that great marine conference.  With kind regards, Anthony Calfo> PS: feel welcome to call me at 412-795-XXXX. We can chat more So you don't think I'm a crank with nothing better to do than waste your time - Here is my personal information - (512) 257-XXXX if you call I will be happy to call you back and expand a little on things - It's tough to catch my vision in an email. 37 years old Electronics Engineering degree (specializing in the manufacture of semiconductor chips from sand to Pentium 4) XXXX North Cannes Drive, Cedar Park, Texas (Austin suburb) 78613  Ric Raley <Do not be afraid to try new things Amateurs built the Ark Professionals built the Titanic>

Tank  design   I am building a 48x48 with full top out of .5 cell cast ,and would like to know if i can go 30" on height. I cannot find a acrylic thickness calculator or a definite on any thing.  Help would be greatly appreciated since the material is on the way, and the supplier is going to cut it for me.                                                          THANKS <You could make an acrylic tank of these dimensions from half inch material, but even with an annealed top it will bow badly on all sides. For thirty inches tall and this "run" (length of sides) you really should use 3/4" material. Bob Fenner>

Acrylic Tanks You guys have been so helpful and WWM has been a god send.  Sorry to pester,  but another question. <Never a bother- that's what we're here for!> Standard acrylic tanks that are 72" X 24" X 30" made by Tenecor are 1/2" thick.  This seems a little thin, what do you think? They will make one in 3/4" but it will cost 50% more. <I'd be comfortable with this thickness, but if you feel more comfortable with 3/4", then go for it!> I was thinking to get them to change the dimensions to 72" X 30" X 24".  Would this help with the thickness at 1/2"? Less bowing/cracking possible? <Well- no one can guarantee the degree to which a tank will bow once filled, but Tenecor makes very high quality products, and I'd follow their recommendations, with regard to acrylic thickness> I currently have a glass 180, which I've had for 20 years, but have vowed to never move again.  So Acrylic, which you guys in all your post seem to like better. Thanks in advance.  Brian    <I love acrylic- so many benefits...just be careful when cleaning it so you don't scratch it, okay! Good luck! Scott F.>

Deciding on Tank The penny pincher is back for more advice. Thanks for your response last week to my question regarding should I get a 125 or 75 gallon tank with the variable being the lighting. My birthday is this week and by this weekend my purchase will be made. Also, purchased your book and I love it. I have several questions though and they are as follows: 1. Any difference in tank quality based on manufacturers such as Perfecto, All-Glass, Oceanic ...etc.? I saw an advertisement on Perfecto tanks that looked pretty good and Oceanic tanks looked a bit expensive comparatively. <Perfecto and All-Glass are about the same in quality IMO, but the Oceanic product is worth the money in difference.> 2. Any suggestions/advice on tank stands made of oak, pine, particle board? I saw a good deal on a pine stand. <No to anything made of Particle board materials...> 3. Any suggestions/advice on a hood? I'm leaning towards a glass hood, so down the road I can upgrade my lighting without replacing the whole hood. My thought is that it would be cheaper to take this path.  <You mean a glass "top" right? Rather than Acrylic, or? You might want to look into just leaving the top uncovered... and making, buying a hood of wood (coated), plastic construction... with a reflective interior> 4. As for lighting, how many total watts of Fluorescent lighting would I need to support live rock and hardier inverts? What's the best combination? (example 1 actinic to 2 full spectrum day light bulbs)  <This can be a tricky question... 3-5 or so watts per gallon or so should do it... the proportion you state is about right...> 5. How many watts of power compacts to support live rock and hardier inverts? for same support? What's the best combination? (example 1 actinic to 2 full spectrum day light bulbs)  <About the same... in terms of wattage consumed> 6. Can I combine fluorescent and power compacts and if so what is the optimum combination? <Yes, the watts consumed proportionality is not important> 7. You mention in several of your Q&A's regarding reduction of phosphates that the food source may have an impact on these levels. I checked my food sources and some do not list the make-up of food in such detail and others have what is called polyphosphates. Is polyphosphate a culprit of high phosphate levels? <Possibly... but not generally... most any food-source of phosphate period is going to be readily absorbed, otherwise taken out of any maintenance equation in an up-and-going system> I know that this is a lot of information, but I just want my investment to be a beneficial one for me and my livestock for a long period of time. Thanks in advance for your insight/advice. Nick <I understand, and you're welcome, Bob Fenner>

Tank Diagram Mr. Fenner, I am sending you my second draft of my tank design. The picture shows what is planned for behind the tank and the placement of it's equipment. I'm not sure if you remember the picture I sent to you a few days ago.  <I do> I showed how my equipment would be housed in our walk in closet behind the tank, allowing us to have the tank built into the wall. Well after much debating my wife can not part with the closet space. I have now designed our setup using the stand the aquarium came with. My major hurtle was that the cabinet has a wall in the center, dividing the cabinet in half. I am not at all brave enough to take it out and find other ways to support the tank (75gallons.) My idea, as you will be able to see in the picture, is to drill two holes into this dividing wall. That will allow me to run piping from the sump (on the right facing behind the tank) to the refugium (on the left facing behind the tank) and vice versa. <Drilling round holes (not near the edge of "the wall") should be fine... Definitely do not remove this support> Would you mind looking over this design and let me know if you feel I have a disaster on my hand? My concerns as of this Monet they are subject to change, and often do) are; 1) The placements of the gate valves. I fear they are not at the right place to have the best control over the flow. Or if I even need them on the overflows. <They're fine... situate them where it is easiest for you to adjust (probably just once)...> 2) I wonder if how I planned to two overflows to join is a smart idea.  <I would leave them separate.> Do I need to increase the pvc diameter from 1" to 2" at the place they join? Or should they just run independently to the sump? <Independent or to 1 2" (surface area of a circle = pi R squared...> 3) Will I need baffles in the sump?  <Not really> I fail to see (I am quite blind to where bubbles will become problematic) a need for them in this design. I will need to find a DIY place (id they are in fact needed) to find a way to make baffles in a Rubbermaid sump. :) <A few ways... best with "races" or guides siliconed to sides, bottom so that baffles can be raised, taken out...> I am sorry for the long post and for pestering you so much this week. Your help both through your web site and by email make a word of difference. Thank you so very much! Josh <No worries. The Mag4 going from the sump to the refugium is likely oversized... I would look into something smaller flow rate wise... 3-4 volumes per hour turnover here is about right. Bob Fenner>

Become a Sponsor Features:
Daily FAQs FW Daily FAQs SW Pix of the Day FW Pix of the Day New On WWM
Helpful Links Hobbyist Forum Calendars Admin Index Cover Images
Featured Sponsors: