FAQs on Calcium Reactors, Operation By Brands,
Makes & Models: Knop
Related Articles:
Calcium Reactors,
The Top 10 (Plus) Frequently Asked
Questions about Calcium Reactors by Jason Chodakowski
Calcium Reactors and How They Work
by James Gasta
Calcium, Understanding Calcium &
Alkalinity, Kalkwasser, Calcium
Reactors
Related FAQs: DIY Calcium Reactors, Calcium Reactors 1, Calcium Reactors 2, Calcium Reactors 3, Calcium Reactors 4, Calcium Reactors 5, & FAQs
on Calcium Reactors: Rationale/Use, Selection, Installation, Operation, Media, Measuring, Trouble-Shooting, & Calcium and Alkalinity, & FAQs
on: The Science of Calcium &
Alkalinity, Importance, Measure, Sources, Use of
Additives, Troubleshooting/Fixing, Products,
|
|
KNOP C Calcium Reactor - 10/06/2009
Hello, I was wondering if you could help me, I have a KNOP C Calcium
reactor & I broke the blue fitting that supplies the main reaction
chamber with CO2, it is screwed into the main housing with 1/4"
OD
tube that goes to the bubble counter. Do you know where I can find
these fittings?
<Mmm, yes... MarineDepot (.com)... they are presently the U.S.
master distributor for Knop Products. Bob Fenner>
Re: KNOP C Calcium Reactor - 10/06/2009
I've tried them, they don't have many parts for the Knop c
reactor, do you know if john geist fittings come with metric threading?
I cannot find this as well.
<Mmm, am going to BCC DianaF here... She was the MD for Knop ahead
of MD...
and I think she still has these parts on hand. BobF>
Re: KNOP C Calcium Reactor
That would be great if she has some. Pleas let me know.
<Please be patient; she will respond directly. B>
Re: Overflow sizing, amount/Ca reactor valve
1/27/08 Scott, <Hello Matthew!> Would you happen to know
where i can find a Needle Valve used for calcium reactors, just like
the ones used by My Reef Creations.com, I think its a 1/4"
threaded bit with a quick disconnect for 1/4" tubing and it has a
silver colored adjustment valve just like your standard co2 regulator
would have. <I do not know exactly the valve they use, but from what
you describe I am confident you can find one at McMaster.com. They have
thousands of different valves, so be patient and I am sure you will
find it there.> I want to see if i can use that on my old Knop
reactor since the Knop valve sucks at doing its job. Thanks,
Matthew
<Welcome, Scott V.>