|
Home | Marine Aquariums |
Freshwater Aquariums |
Planted Aquariums |
Brackish Systems |
Ponds,
lakes & fountains |
Turtles & Amphibians |
Aquatic Business |
Aquatic Science |
Ask the WWM Crew a Question |
Please visit our Sponsors | ||||
Canister filter position
2/3/11
Can a canister filter run from a sump? 7/9/05 Hi - I tried to find an answer to this question from the thousands of questions you've answered without any luck. I have just set up a 6x2x2' marine tank with a large wet-dry filter in a sump. I was wondering if a canister filter could sit beside the sump in the cabinet and be set up to draw water out of the sump and return it to the sump? <Yes> Does a canister filter actually have to be below the tank, or can it run when it is beside the tank - <Can, once primed> I'm guessing it probably can't as the water level is the sump will be below the water level in the filter. If it is not possible, what is the next best way to run mechanical and chemical filtration out of the water in my sump? <Another pump, filter/box to contain this media> Thanks for your help! Jeremy <Keep dreaming and scheming... Bob Fenner> Fluval Canister Filter for Sump Intake? Not Safe... 12/2/06 Hi Bob, <Hey Laura, JustinN with you today.> My husband and I have a 150 gallon tank with approximately 60 lbs of live rock. <I would add more rock to this, for natural filtration.> We have had a recurring problem with nitrates and find ourselves doing 30% water changes weekly. <10-25% weekly is recommended anyhow.> Our filtration system consists of a Fluval FX5 canister filter. We do not have a protein skimmer but we plan to purchase one soon. <This combination is likely your source of nitrates. The canister filter, unless cleaned thoroughly and frequently, will tend to become a nitrate farm. Add to that the lack of waste proteins being removed by a protein skimmer, and you've got nitrate issues.> Our bio load is relatively small in relation to the tank size. A tang, an angelfish, a couple clowns and two sea anemones currently inhabit the tank. We would like to install an in-sump protein skimmer, but we want to continue utilizing the canister filter instead of purchasing a wet-dry filter. <A live rock filled sump would likely provide better results than a wet/dry here anyhow.> We were wondering if there is a way to use the canister filter's intake/output in conjunction with the sump. Would it be possible (and effective) to place the canister output hose inside the sump (instead of the tank) and then use another pump to push the water from the sump back into the tank? <Not practical (or safe!) to do this. Without drilling the tank, an over-the-back weir will be your only practical solution. It would be nearly impossible to keep the canister flow matched to the return pump, eventually leading to an overflow somewhere in the line.> We were hoping to avoid the use of a weir or a protein skimmer that hangs off the side of the tank. I have done some extensive Googling but I haven't seen much documentation on the topic. Any advice/suggestions you can provide would be greatly appreciated. <I would suggest using hang-on-back weirs, as you're unfortunately wishing not to do. If you choose this solution, do use a pair of weirs per drain, for redundancy. You're simply too likely to run into severe problems with your proposed setup.> Thanks in advance for your help, Laura <No problems, Laura. Glad to be of service. -JustinN> Eheim Canister Filter Hey WWMCrew! I recently purchased an Eheim 2217 canister filter. My plan was to place the intake and return tubes in my sump. In the manual it states to place the unit below the water level. The sumps' water level would be below the top of the canister filter. I don't want the intake and return tubes in my display tank. Is there anyway around this? Thanks, Jeremy <Mmm, yes... you can/could place both the intake and discharge lines deep in the sump (to prevent loss of prime should the power fail, or the water level drop too low) and "suck" up water into the Eheim via the discharge side to fill the unit and intake line with water... and do this every time you find yourself servicing the canister. Bob Fenner> Anemone lost to a canister filter! Hi Blundell, Disaster struck last night in my tank. One of my anemones got sucked into my canister filter and died. It's too bad because it had been thriving. My question is can I still use my filter? << Yes, but I'd clean that thing out well. >> I'm afraid that it might pollute my whole tank. << Bigger concern is will it happen again. I'd make sure to improve the screening method on that filter before using again. >> Thanks again! Martin << Blundell >> Canister filter question Dear Bob, <You got Steven pro today.> I love
your website, it has been a great help in learning how to set up my saltwater
tank. My tank has been going for about six months. It is a 12 gallon tank (one
of the ones from Eclipse) that I have taken the hood off of and put a power
compact light and a glass top for better lighting on. I have about 18-20lbs of
live rock and about an inch of live sand as a substrate. I wanted to add a
protein skimmer so I bought the Prizm skimmer as I read on your site that it was
a good one for a small tank. I have a few polyps and one medium mushroom. I also
have two clown fish that are fairly small. My levels are pretty good pH 8.1,
nitrite 0, nitrate 10, ammonia 0, alkalinity 4meq/l, KH 12 and I add the
standard trace elements Kalkwasser, strontium, coral vital, iodine. My question
is that now that I have the protein skimmer I have to get rid of my filter that
was hanging off the back of the tank because I have run out of room. A friend of
mine said he would give me his Eheim professional II 2026 and all I would need
to do is buy the substrate for the inside. This is a good canister filter that
would solve my space problem, but is it too much for my small tank? In the next
year I would like to move my small tank into a larger tank (probably a 30 or 50
gallon) so I thought this would be a good filter to grow with. Next question,
should I use all of the recommended substrates (Ehfisubstrat, Ehfimech, 3pads)
so that it becomes a biological filter in addition to my live rock? I asked at a
store and they said that usually in a small tank you would change the pads every
2 months and every 6 months you should rinse the substrates in salt water. He
said that it was okay to let most of your bacteria go to the filter and that in
the end this would be beneficial for the tank. Does this all sound correct to
you? <I have a suggestion for you that is going to sound weird, but it is what I
would do. I would get the Eheim and not put any media in it. Your 12 gallon tank
is pretty small to start with. Once you added the rock and sand, it probably
only has about 8 gallons of water in it. You are not thinking of adding any more
fish than your two clowns, are you? I would use the Eheim for additional
circulation (~250 gph) and water holding capacity (maybe a gallon). Your rock
and sand will provide you with enough bacterial surface area for your two fish.>
Thanks for your help. -Pete <You are welcome. -Steven Pro> |
|
Features: |
|
Featured Sponsors: |